Jitter

Jitter never blocks anything you didn’t ask it to. It just makes your phone worse the longer you scroll.

An Android launcher.

A stall never decides anything for you. It only makes staying cost something.

[ INSTALL ]

Jitter doesn’t block you.

It makes staying harder.

At ten minutes, one scroll in ten stalls for half a second.
At twenty, nine in ten stall for three.
Default settings, compressed here.

How it works

The usual answer is a wall. A blocker decides when you have had enough and shuts the door, and from then on you are arguing with a rule instead of noticing what you are doing. Jitter’s answer is not a wall. It changes what staying costs.

By default, your first ten minutes in an app cost nothing. After that, a scroll sometimes stalls: it goes through, and then the app ignores your finger for a moment, taps included. The longer you stay, the longer a stall lasts and the more often it comes. At the default settings:

The minutes are counted for each app across a six-hour cycle, and inside that cycle they only go up: leaving and coming back does not reset them.

How it works, to the line of source

Install

Jitter is not on Google Play. You download the app’s file, an APK, and install it yourself; Android will ask you to confirm a few things on the way, and the steps below say what you will see.

Free. Open source under GPL-3.0-or-later. Android 11 and later.

  1. 1

    DOWNLOAD

    Download the APK. The steps below show how to check it is the published file. [ DOWNLOAD APK ]

    Check: its SHA-256 matches the one on the release page.

  2. 2

    ALLOW THE INSTALL

    Android asks you to let your browser install apps, and Play Protect may warn you or block the install.

    Check: opening Jitter shows its SETUP screen.

  3. 3

    ENABLE JITTER

    Android may block the accessibility switch until you allow restricted settings (it did on Android 16). Then give Jitter accessibility and usage access.

    Check: ACCESSIBILITY and USAGE ACCESS show [✓] in SETUP.

  4. 4

    SET IT AS HOME

    Choose Jitter as your home app. Your old launcher stays installed, and you can switch back any time.

    Check: HOME APP shows [✓] in SETUP.

The exact Android detail

Android is going to make you confirm things.

Jitter is sideloaded.

On the phone in the screenshots, Android treated this file as unverified, and said so more than once. That is its protection working, not Jitter’s. You should be suspicious of any APK you are told to install. Including this one.

Jitter does not ask you to permanently disable any Android security protection. Some devices may require an extra confirmation or a temporary setting change before they allow an app from outside Google Play. What we can do is tell you which screens you will see, so none of them looks like a failure.

  1. 1 — Download the APK from GitHub Releases. Each release page lists the file’s SHA-256. Check it matches:

    certutil -hashfile jitter-v1.0.3.apk SHA256 (Windows) shasum -a 256 jitter-v1.0.3.apk (macOS) sha256sum jitter-v1.0.3.apk (Linux)

    v1.0.3 — SHA-256 f82761968da5ded9268e22f550aa94ad2cd42fb730d50d91569d17fb4480083a, the published jitter-v1.0.3.apk. This hash is for v1.0.3 only: if the release page lists a newer version, check against that page instead.

  2. 2 — Allow your browser to install apps. Opening the file may stop at a permission screen. Android offers a settings screen for that one app. On the phone in the screenshot the switch reads Allow unknown apps to be installed. Turn it on for your browser and come back. On that phone it was per-app, not global. Turn it back off afterwards.

  3. 3 — Play Protect may warn you, or block the install. What you see, and what happens next, varies by manufacturer and Android version. A warning does not necessarily mean malware was detected.

    Don’t bypass a warning you don’t understand. If you are unsure, read the source or stop.

    If Play Protect shows a warning with an option to continue, it may be behind More details or Install anyway.

    On the phone these screenshots come from, Play Protect blocked the install outright: it showed App blocked to protect your device with a single Got it button. The install only went through after Play Protect scanning was turned off in the Play Store’s Play Protect settings, which asked for a fingerprint to confirm. There is no way around a block from inside Jitter.

    That is what happened on one phone, not a recommendation, and it is meant to be temporary. If you turn scanning off to install Jitter, turn Play Protect scanning back on as soon as Jitter is installed.

  4. 4 — Install. Unremarkable.

  5. 5 — Allow restricted settings, if Android asks (it did on Android 16). On the phone in the screenshot, Android blocked Jitter’s accessibility service the first time it was turned on. The wording varies by manufacturer. On the phone in the screenshot the dialog says Access denied for this app, and the way through is Remove setting restrictions, which appears both in that dialog and in App info for Jitter under the three-dot menu. On other phones the wording differs; the menu item may read Allow restricted settings. Either way, allow it, then turn accessibility on again. Jitter’s setup guide walks through this too.

  6. 6 — Grant accessibility and usage access. Android shows a strong warning here, worded differently by each manufacturer. On the phone in the screenshot it says Jitter is requesting to monitor and control device. The warning describes what the permission allows, not what Jitter does with it. Two of the things it warns about are switched off in Jitter’s own configuration: it cannot retrieve window content, and it cannot tap or swipe for you. What it does use the permission for is knowing which app is in front, and holding a swipe. app/src/main/res/xml/accessibility_service_config.xml

  7. 7 — Choose your tracked apps. Instagram, X, YouTube and Snapchat by default. You pick.

  8. 8 — Set Jitter as your home screen. Your old launcher is not gone. You can switch back any time in Android’s settings; on the phone in the screenshot the screen is called Default home app.

See the Android screens
Android's Install unknown apps screen for Chrome with its switch turned on, and the system dialog asking whether to install Jitter.
2 · Your browser asks to install apps
Google Play Protect dialog reading App blocked to protect your device. It names Jitter, warns that the app can request access to sensitive data, and offers only a Got it button.
3 · Play Protect blocks the install
Android dialog titled Access denied for this app, saying restricted settings must be allowed before the permission can be granted, with a Remove setting restrictions link.
5 · Android stops the accessibility switch
Android dialog saying Jitter progressive friction is requesting to monitor and control device, listing View and control screen and View and perform actions, with Allow, Uninstall and Disable buttons.
6 · Android’s warning before accessibility
Android's Default home app chooser with Jitter selected above the phone's other home screens.
8 · Picking Jitter as the home app

iQOO Neo7 Pro · Android 16 · the step each screen belongs to

Untracking an app waits two and a half minutes before it lets you confirm. For Instagram, Facebook, X, TikTok, Snapchat and any app that declares itself a social app, tracking comes back by itself after three days, or at the next restart if that is sooner. The screen tells you before you confirm.

Coming from the old tester build (dev.molasses)? Uninstall it first. Android treats it as a different app and its data does not carry over.